Drawings derived from actual CAD. Individual author and component terms apply; no blanket license is assigned. Keep these credits and original notices with redistributed files.
Exploded views use illustrative spacing. Sections pass through the measured filament axis; Sphinx contains printed parts only and YUDX has no hotend in the selected assembly. V2.4 rear-panel exhaust openings are corrected to the native 147 mm width. These are illustrations, not manufacturing drawings.
Collection sheets and repeating patterns retain the same reviewed native-CAD projections. Views use independent scales. Repeated patterns reuse the original views without mirroring. Original authors are named within the artwork; complete source links are stored in PNG metadata, gallery entries and the download manifest.
GPL-3.0
GPL-3.0
LICENSEGPL-3.0
LICENSEGPL-3.0
GPL-3.0
GPL-3.0
CC BY-NC-SA 4.0（部品別例外あり）
G2SA / WWG2はGPL、Annex DFAは別ライセンス。現在の構成には含めていません。GPLとCCの適用範囲を部品単位で保持します。
LICENSE再配布条件の明記を確認できず / 公開前に確認が必要
ANNEX ENGINEERING HARDWARE AND SOFTWARE EULA（別条件）
Annexの独自EULAを個別に保持します。CAN基板・専用ブラケットは含みません。PTFEの端面は取付プレビューであり、製作用の切断長を指定していません。
LICENSE.mdCC BY-NC-SA 4.0
ガントリーの設計データはCC BY-NC-SA 4.0。別リポジトリのクランプはGPL-3.0。ビューアーコードのGPLを全モデルへ一括適用しません。
LICENSEGPL-3.0
LICENSECC-BY-SA-4.0
LICENSE.mdGPL-3.0
LICENSECC-BY-NC-SA-4.0
LICENSEGPL-3.0 for original design; embedded component terms retained
Embedded original hardware and manufacturer references retain their own original terms. Full printer travel and physical compatibility are not certified.
LICENSECC-BY-NC-SA-4.0
Each original design retains its own license. Embedded hardware retains its original terms. Archetype source archive identifies v22, not the latest printable STL revision.
LICENSECC BY-NC-SA 4.0 for vendor CAD and adaptations; component-specific terms retained.
1.5 mm print sheet assumption; continuous cable preview with proposed service loops. No complete moving-body collision or firmware/hardware certification. Software license does not relicense CAD.
CC BY-NC-SA 4.0
235 mm plate / 220 × 220 × 200 mm nominal build area. WIP head and chain routing are not certified installed fits; original contacts retained. Incomplete Belted-Z is not enabled.
CC-BY-NC-SA-4.0
Noncommercial/share-alike CAD conditions remain separate from application code. Original E3NG files: https://rh3d.xyz/ ; RH3D/E3NG reference commit 095edee85eb7c813bdcdc25489f05e884cccad91.
LICENSEGPL-3.0
最新版CADを使用。作者のBOM・組立PDFは未更新です。付属G-codeはRRF用でKlipperマクロは未提供。
LICENSE